Characteristics of polycarbonate greenhouse Harvest PC

The depth of the material gidpostroy.ru is 4 mm.

If you would like, you can boost the distance of the construction to 6 yards or longer. To do this, it’s sufficient to join a two-meter extension. When picking a drawing, look closely at the space between the arches. This figure must be 65 cm, that’s the most appropriate duration for the specified depth of the material. The width of the doors based on the maker’s drawing is 90 cm.

Before assembling a polycarbonate greenhouse, then it’s important to select a location because of the location. If this is done correctly, it is possible to provide yourself with a harvest of fresh veggies for the entire year.

The place for your upcoming greenhouse is marked instantly at the preparation of this garden plot. To be able to melt the snow in the location of their greenhouse as early as possible, the best point on the site is going to be a small elevation. In addition, in such a location won’t have to be worried about substantial humidity as soil and atmosphere in the construction.

Assemble a polycarbonate greenhouse in an elevated site – means to care for the optimal temperatures indoors.

When it is not feasible to place a greenhouse in an elevated position, you’ll need to pour a coating of fine shattered rock about 20 cm and the identical layer of fertile soil to create seedbeds.

Before building a greenhouse on your backyard plot, it’s also wise to consider where and how this structure will be set up. To begin with, you have to pick a location for this. The greenhouse ought to be found in a well-lit area at least a few meters away from homes, barns and other structures.

How to Put in a greenhouse Based on the Faces of the Planet

Make sure you level the dirt surface – it is ideal to remove the surface. This can also get rid of weed seeds. And for simplicity of work, eliminate the dirt in an area that’s around a meter wider on each side of the rectangle you want.

Additionally, it is worth thinking about having a base. As producers state, today most greenhouses don’t need it, particularly if they (greenhouses) are used just in the summer and spring period. But, experienced gardeners still recommend making at least a basic basis from a pub. It is quite simple – it’s enough to associate with each other using metal corners and screws four pieces of timber using a cross-section of 10 * 10 cm. The dimensions of such a base should be equivalent to the base of the future greenhouse.

Simple bar base

You could also earn a strip base of concrete. He’s more reliable than a pub base, but requires greater financial and labor expenses. Incidentally, the rainwater, that is used in winter, with no and don’t do with it at all.

Stages of the formation of a strip base: a schematic representation

Many manufacturers advise to set up greenhouse structures without building a foundation. For this purpose, they equip the frame with specific T-shaped legs, so that the structure was firmly fixed. However, as practice shows, it’s still necessary to construct a base: therefore and the basis will be more rigorously fixed and the elements of the basis in touch with the soil, will be kept much more in its original condition.

The most important thing is to treat the material with specific agents to protect the timber from moisture. The material is installed on concrete cubes that are dug into the ground. For a six-meter arrangement, they need 10 bits: four to each side and one in the center of the ends.

Before you do the greenhouse itself, you will need to choose the right place for this. It must be an even site, so that the frame was found evenly, without distortions. It should be sunny and not obscured by buildings or trees.